# data[].attributes.definition
Water mass anomalies expressed in terms of equivalent water height from all water storage compartments including snow, surface water, soil moisture, and deep groundwater; not corrected for spatial leakage.

# data[].attributes.definition
Time-variable component of the uncertainty estimate for the GRACE-based water storage variability, given as standard deviation per grid point.

# data[].attributes.definition
In Hydrology, throughfall is the process which describes how wet leaves shed excess water onto the ground surface. These drops have greater erosive power because they are heavier than rain drops. Furthermore, where there is a high canopy, falling drops may reach terminal velocity, about 8 metres (26 ft), thus maximizing the drop's erosive potential.

# data[].attributes.note
Added to support Critical Zone Observatory (CZO) data use cases. 

# data[].attributes.definition
The THSW Index uses temperature, humidity, solar radiation, and wind speed to calculate an apparent temperature.

# data[].attributes.definition
The THSW Index uses temperature, humidity, solar radiation, and wind speed to calculate an apparent temperature.

# data[].attributes.definition
The THW Index uses temperature, humidity, and wind speed to calculate an apparent temperature.

# data[].attributes.definition
The THW Index uses temperature, humidity, and wind speed to calculate an apparent temperature.

# data[].attributes.definition
The time at which a sensor produces output

# data[].attributes.definition
Ideally time format according to ISO 8601 (HH=hour, MM=minute, SS=second).

# data[].attributes.definition
Topographic wetness index (TWI), also known as the compound topographic index (CTI), is a steady state wetness index. It is commonly used to quantify topographic control on hydrological processes.

# data[].attributes.note
Added to support Critical Zone Observatory (CZO) data use cases. 

# data[].attributes.definition
Topographic wetness index (TWI), also known as the compound topographic index (CTI), is a steady state wetness index. It is commonly used to quantify topographic control on hydrological processes.

# data[].attributes.note
Added to support Critical Zone Observatory (CZO) data use cases. 

# data[].attributes.definition
Please note wavelength of the measurement.
FNU: Formazine Nephelometric Units – Scattered Light Measurement (Angle 90°) according to DIN EN ISO 7027.
FTU: Formazine Turbidity Unit.
NTU: Nephelometric Turbidity Unit – Scattered Light Measurement (Angle 90°) according to US regulations.

# data[].attributes.definition
Please note wavelength of the measurement.
FAU: Formazine Attenuation Units - Transmitted Light Measurement (Angle 0°) according to DIN EN ISO 7027.

# data[].attributes.definition
consecutive number (e.g of a measurement)

# data[].attributes.definition
The pressure of a vapor in equilibrium with its non-vapor phases

# data[].attributes.definition
Please Specify the kind of Vapor Pressure (e.g. satuartion vapor pressure,  current vapor pressure, vapor pressure deflict) in sensor description.

# data[].attributes.definition
The difference between the actual water vapor pressure and the saturation of water vapor pressure at a particular temperature.

# data[].attributes.definition
The difference between the actual water vapor pressure and the saturation of water vapor pressure at a particular temperature.

# data[].attributes.definition
Sensor e.g. ultrasonic measurement device. Therefore p.r.n estimation of snow height instead of vegetation height in winter.

# data[].attributes.definition
Vegetation is an assemblage of plant species and the ground cover they provide.

# data[].attributes.note
Added to support Critical Zone Observatory (CZO) data use cases. 

# data[].attributes.definition
Vegetation is an assemblage of plant species and the ground cover they provide.

# data[].attributes.note
Added to support Critical Zone Observatory (CZO) data use cases. 

# data[].attributes.definition
The battery voltage of a datalogger or sensing system, often recorded as an indicator of data reliability

# data[].attributes.definition
Voltage of battery. Typically equal to supply voltage of loggers or devices. Sometimes separatly measured, e.g. voltage of lithium batterys in computers.

# data[].attributes.definition
Operating parameter of a data logger. Supply- or operating voltage of a data logger.

# data[].attributes.definition
Operating parameter of a device. Supply- or operating voltage of a device.

# data[].attributes.definition
Volume. To quantify discharge or hydrograph volume or some other volume measurement.

# data[].attributes.definition
Volume. To quantify discharge or hydrograph volume or some other volume measurement.

# data[].attributes.definition
A counter which counts the number of total datalogger watchdog errors

# data[].attributes.definition
A counter which counts the number of total datalogger watchdog errors

# data[].attributes.term
Water column equivalent height, absolute

# data[].attributes.definition
The absolute pressure (combined water + barometric) on a sensor expressed as the height of an equivalent column of water.

# data[].attributes.term
Water column equivalent height, absolute

# data[].attributes.definition
The absolute pressure (combined water + barometric) on a sensor expressed as the height of an equivalent column of water.

# data[].attributes.term
Water column equivalent height, barometric

# data[].attributes.definition
Barometric pressure expressed as an equivalent height of water over the sensor.

# data[].attributes.term
Water column equivalent height, barometric

# data[].attributes.definition
Barometric pressure expressed as an equivalent height of water over the sensor.

# data[].attributes.definition
Water depth is the distance between the water surface and the bottom of the water body at a specific location specified by the site location and offset.

# data[].attributes.definition
Water depth averaged over a channel cross-section or water body.  Averaging method to be specified in methods.

# data[].attributes.definition
Water depth averaged over a channel cross-section or water body.  Averaging method to be specified in methods.

# data[].attributes.definition
Water level relative to datum. The datum may be local or global such as NGVD 1929 and should be specified in the method description for associated data values.

# data[].attributes.definition
Water potential is the potential energy of water relative to pure free water (e.g. deionized water) in reference conditions. It quantifies the tendency of water to move from one area to another due to osmosis, gravity, mechanical pressure, or matrix effects including surface tension.

# data[].attributes.definition
Water potential is the potential energy of water relative to pure free water (e.g. deionized water) in reference conditions. It quantifies the tendency of water to move from one area to another due to osmosis, gravity, mechanical pressure, or matrix effects including surface tension.

# data[].attributes.definition
Please note if values are corrected for atmospheric pressure or not.

# data[].attributes.term
Water Use, Commercial + Industrial + Power

# data[].attributes.definition
Water pumped by commercial, industrial users.

# data[].attributes.term
Water Use, Commercial + Industrial + Power

# data[].attributes.definition
Water pumped by commercial, industrial users.

# data[].attributes.definition
Water pumped by domestic wells; residents and landowners not using public supply. Nonagriculture wells.

# data[].attributes.definition
Water pumped by domestic wells; residents and landowners not using public supply. Nonagriculture wells.

# data[].attributes.definition
Recreational water use, for example golf courses.

# data[].attributes.definition
Recreational water use, for example golf courses.

# data[].attributes.definition
Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.

# data[].attributes.definition
Humidity mixing ratio of a parcel of moist air is the ratio of the mass of water vapor to the mass of dry air.

# data[].attributes.definition
The height of a surface wave, measured as the difference in elevation between the wave crest and an adjacent trough.

# data[].attributes.definition
The height of a surface wave, measured as the difference in elevation between the wave crest and an adjacent trough.

# data[].attributes.definition
Mass is a property of a physical body. It is generally a measure of an object's resistance to changing its state of motion when a force is applied.

# data[].attributes.definition
E.G. Weight of a Vessel with various water level.

# data[].attributes.definition
The pressure exerted by the fluid at the wellhead or casinghead after the well has been shut off for a period of time, typically 24 hours

# data[].attributes.definition
The pressure exerted by the fluid at the wellhead or casinghead after the well has been shut off for a period of time, typically 24 hours

# data[].attributes.definition
It is strongly recommended that a variable with this standard name should have a units_metadata attribute, with one of the values "on-scale" or "difference", whichever is appropriate for the data, because it is essential to know whether the temperature is on-scale (meaning relative to the origin of the scale indicated by the units) or refers to temperature differences (implying that the origin of the temperature scale is irrevelant), in order to convert the units correctly (cf. https://cfconventions.org/cf-conventions/cf-conventions.html#temperature-units).

# data[].attributes.definition
The effect of wind on the temperature felt on human skin.

# data[].attributes.definition
The effect of wind on the temperature felt on human skin.

# data[].attributes.definition
"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)